Frangelico 4-Tier Concrete Water Feature w/ Giardino Pond - 275cm
✓ Made in Australia
✓ Built New To Order
✓ Choice of 2 Colours
✓ Bonus Pump & Hose Kit
✓ Our couriers are fully operational
Questions? Call Us: 1800 661 929
Estimated Arrival: Between and .
Colours: Scroll below for details.
Note: We make each piece new to order and aim for a 6-8 week ETA for casting, sculpting, colouring, drying and final touches.
Create a relaxing ambience in your garden or patio with the Frangelico 4-Tier Concrete Water Feature with Giardino Pond.
NOTE: Identical version without the horses is the Galliano Concrete Water Feature.
THE GIARDINO POND
The pond requires either of the below to put it together to seal the pond:
- Fibreglass Liner for Giardino Pond: The more cost efficient method and less of a headache. Does not require waterproofing. Does not require a landscaper.
- Concrete slab: A solution of cement to be mixed to put the pond together. Requires waterproofing after as cementing doesn't make it waterproof. May require a landscaper.
Pond Liner for Giardino Pond
The pond consists of 6 slabs. A landscaper may be required to assist with cementing it together to waterproof each one to make it watertight. Thus we recommend the pond liner (sold separately) as the easier and simpler choice.
Picture of Giardino pond pieces (prior to colouring).
- Frangelico Water Fountain 275cm
- Giardino Fountain Pond 240cm (Valued at $895)
- FREE Resun King 4F Pump & Hose kit (valued at $249).
- Dimensions (LxH): 140cm x 275cm
- Fountain Weight: ~800kg
- Height: 35cm
- External diameter: 240cm
- Internal diameter: 214cm (both sides take 13cm)
- 6 pieces at 13cm wide per piece
Please note there is a slight gap between the horses. Once the fountain is set up with the pond, it's not easily noticeable at a distance. We will try our best to minimise the gap.
Video is of a 25 year old Frangelico from our craftsmen in Sydney we have partnered with for over 3 years. Our quality materials stand the test of time.
OUR LIMESTONE CONCRETE PRODUCTS
All our limestone concrete items are hand made in Australia. Each piece is made new to order in our Sydney Workshop. We strive to continually improve our raw materials and refine our moulds and designs to achieve the highest quality end product.
Please note as, due to the nature of the items being hand made, no two are identical and slight imperfections may occur.
Refer below for actual colours of our limestone concrete products. Select your desired colour located near the 'Add to cart' button.
This item is made from a mix of reconstituted marble chip, limestone & cement with the right blend for a superb finish. Due to the time required for casting, sculpting and drying we aim for a 6-8 week ETA.
WK 1-4: Solution in mould, sculpting, drying
WK 5: Patch up, fill up air bubbles, grind, filing
WK 6: Colouring, drying
WK 7: Final touches
WK 8: Pack & ready for shipping
Pump Selection Guide
Setting Up Your Limestone Concrete Fountain
Self-Contained: Usually located where the pedestal meets the largest bowl.
Use With Pond: A custom hole drill may be required at the pedestal base for the pump housing.
The tubing traverses the pedestal through to the acorn. We advise using a suitable "roof & gutter sealant" to seal the pump housing.
All our pumps sold alone or included in our water features come with 1 year's warranty. Selected Reefe pumps come with 2 years' warranty.
Due to OH&S regulations, couriers are only permitted to move your freight at the nearest accessible point, i.e. front door/side gate. Please plan ahead if you wish to place the item inside the house.
Large Items: If there are steps or other obstructed pathways the driver may be forced to leave the pallet on the nature's strip. Please ensure you've read the Delivery section of our Shipping Guide.
As our concrete fountains are generally 200-400kg, we advise 2-3 people to assist with moving the fountain to your desired location.
PRICE BEAT GUARANTEE
We work hard to offer the best prices online. If you find a cheaper price elsewhere, we'll do better and beat it by 5%.