Monteray 2-Tier Concrete Water Feature - Large 157cm
✓ Built New To Order
✓ Choice of 4 Colours
✓ 50% deposit option available
Note: We make each piece new to order and aim for a 8 week ETA for casting, sculpting, colouring, drying and final touches.
Create a relaxing ambiance in your garden or patio with the Monteray 2-Tier Concrete Water Feature.
This is a classical self-contained water fountain so a pond is not necessary. It's built to stand upright against the wind, rain and natural elements.
- Dimensions (LxH): 110cm x 157cm
- Pieces: 4 (Middle section & small bowl is 1 piece)
- Weights estimate (top to base):
- Acorn sphere: 40cm (H) at ~30kg
- Middle section: 60cm (L) x 60cm (W)at ~75kg
- Large bowl: 110cm (W) at ~150kg
- Base: 70cm (L) x 70cm (W) x 60cm (H) at ~95kg
- Total weight: ~350kg (note pallet & packaging is extra ~50kg)
New to water features?
Read our guide on How A Water Feature Works.
Looking for something a bit different?
View our full range of Concrete Water Fountains.
USE WITH POND
Our concrete ponds come in 8 pieces to be put together with concrete slabs. Requires some manual work. We recommend a qualified landscaper. View the Concrete Fountain Set Up Guide.
Note a custom hole drill is required at the base to house the pump thus allowing the water to traverse from base to tip.
Note: Please add a suitable pump in the "Add Accessories" section.
OPTIONS TO SEAL THE POND
Pond Liner: Sits within the pond so the pond does not need to be waterproofed. This method is the most economical and hassle-free.
Waterproofing: You will need (1) concrete floor (2) waterproof each pond piece using fibreglass (3) labourer to assist.
WATER PUMP CARE
The pump must be fully submerged in water when in operation or damage will occur. Take care in adding extra water during warmer weather. Failure to follow proper care guidelines voids warranty.
Ensure you measure your fountain and read all the specs before ordering a pump. Regrettably, used pumps cannot be returned.
DELIVERY OF HEAVY ITEMS
Please note, items that are 40kg or over will travel on a pallet. Due to courier OH&S policy, drivers will deliver the pallets to the front of your premises only. Ensure you plan ahead to move your freight to the desired location.
If your driveway is deemed unsafe for the courier truck to be parked, we may need to leave the pallet at a nearby depot, which may incur a re-delivery fee. For further info, please read our delivery guide.
OUR LIMESTONE CONCRETE PRODUCTS
All our limestone concrete items are hand made in Australia. Each piece is made new to order in our Sydney Workshop. We strive to continually improve our raw materials and refine our moulds and designs to achieve the highest quality end product.
Please note as, due to the nature of the items being hand made, no two are identical and slight imperfections may occur.
Our concrete items come in 4 colours. For more colour pictures, click here.
This item is made from a mix of reconstituted marble chip, limestone & cement with the right blend for a superb finish. Due to the time required for casting, sculpting and drying we aim for a 6-8 week ETA.
WK 1-3: Solution in mould, sculpting, drying.
WK 4-5: Patch up, fill up air bubbles, grind, filing.
WK 6-7: Colouring, drying.
WK 8: Final touches, pack & ready for shipping.
Self-Contained: Usually where the pedestal meets the largest bowl.
With Pond: At the pedestal base. The tubing traverses the pedestal through to the acorn.
We advise using a suitable "roof & gutter sealant" to seal the pump housing.
All our pumps sold alone or included in our water features come with 12 month's warranty.
do not include warranty. Modifications to the pump or cord voids warranty.