Terrace 2-Tier Concrete Water Fountain - Large 162cm
✓ Made New To Order
✓ Classical Italian Design
✓ Built In Australia
✓ Choice of 4 Colours
This is a solid concrete item made from a mix of marble chip, limestone & cement. Each piece us made new to order with an 8 week ETA for casting, sculpting, colouring, drying and final touches.
Create a relaxing ambiance in your garden or patio with the Terrace 2-Tier Water Feature. Featuring decorative detailing throughout from the tip to the base, this piece is sure to add a lasting impression to your residence.
This is a classical self-contained water fountain in 4 pieces. It's built to stand upright against the wind, rain and natural elements.
- Type: Self-Contained
- Pieces: 4: Tip (~25kg), small bowl (~40kg), large bowl with attached neck (~240kg), base (~70kg)
- Total Weight: ~375kg
- Width (largest bowl): 110cm
- Total Height: 162cm
- Height base (ground to bottom of bowl): 57cm
USE WITH POND
Our concrete ponds come in 8 pieces to be put together with concrete slabs. Requires some manual work. We recommend a qualified landscaper. View the Concrete Fountain Set Up Guide.
Note a custom hole drill is required at the base to house the pump thus allowing the water to traverse from base to tip.
HOW TO SEAL A POND
There are 2 options to seal the pond:
Pond Liner: Sits within the pond so the pond does not need to be waterproofed. This method is the most economical and hassle-free. We offer liners at 150cm, 220cm & 240cm.
Manual Waterproofing: Requires (1) Concrete floor (2) Waterproof each piece with fibreglass (3) Labourer to assist.
Please note, items that are 40kg or over will travel on a pallet. Due to courier OH&S policy, we're only allowed to deliver to the front of house. Ensure you plan ahead to move your freight to the desired location. Refer to our delivery guide.
OUR LIMESTONE CONCRETE PRODUCTS
All our limestone concrete items are hand made in our Sydney workshop in Australia. We strive to continually improve our raw materials and refine our moulds and designs to achieve the highest quality end product.
Please note as, due to the nature of the items being hand made, no two are identical and slight imperfections may occur.
Our concrete items come in 4 colours. For more colour pictures, click here.
This item is made from a mix of reconstituted marble chip, limestone & cement with the right blend for a superb finish.
WK 1-3: Solution in mould, sculpting, drying.
WK 4-5: Patch up, fill up air bubbles, grind, filing.
WK 6-7: Colouring, drying.
WK 8: Final touches, pack & ready for shipping.
Self-Contained: Usually where the pedestal meets the largest bowl.
With Pond: At the pedestal base. The tubing traverses the pedestal through to the acorn.
We advise using a suitable "roof & gutter sealant" to seal the pump housing.