Umbrella Concrete Water Feature - 162cm
or make 4 interest-free payments of $248.75 AUD fortnightly with More info
Built New To Order
Choice of 2 Colours
Questions? Call Us: 1800 661 929
Estimated Arrival: Between and .
Colours: Scroll below for details.
Note: We make each fountain & bird bath new to order and aim for a 6-8 week ETA for casting, sculpting, colouring, drying and final touches.
✓ Convert to a solar fountain with one of our Reefe Solar Pump Kits.
NOTE: Limit 1 coupon per order.
Create a relaxing ambience in your garden or patio with the Umbrella Concrete Water Feature.
This is a classical self-contained water fountain so a pond is not necessary. It's built to stand upright against the wind, rain and natural elements.
- Base Dimensions (LxH): 110cm x 162cm
- Weight: ~300kg
NOTE: Selecting either pump includes a FREE hose measured appropriate for the water feature.
OUR LIMESTONE CONCRETE PRODUCTS
All our limestone concrete items are hand made in Australia. Each piece is made new to order in our Sydney Workshop. We strive to continually improve our raw materials and refine our moulds and designs to achieve the highest quality end product.
Refer below for actual colours of our limestone concrete products. Select your desired colour located near the 'Add to cart' button.
This item is made from a mix of reconstituted marble chip, limestone & cement with the right blend for a superb finish. Due to the time required for casting, sculpting and drying we aim for a 6-8 week ETA.
WK 1-4: Solution in mould, sculpting, drying
WK 5: Patch up, fill up air bubbles, grind, filing
WK 6: Colouring, drying
WK 7: Final touches
WK 8: Pack & ready for shipping
Pump Selection Guide
Setting Up Your Limestone Concrete Fountain
This fountain functions as self-contained without a pond. Water continually recycles from the largest bowl upwards through the centre to the acorn (peak). For the complete set up, a slight modification can be made to house the pump at the pedestal base for the fountain to be used with a pond.
Self-Contained: Usually located where the pedestal meets the largest bowl.
Use With Pond: A custom hole drill may be required at the pedestal base for the pump housing.
The tubing traverses the pedestal through to the acorn. We advise using a suitable "roof & gutter sealant" to seal the pump housing.
ADD A POND
For the complete look, add the Classical Pond 200cm. The pump can sit at the base of the pedestal. We recommend to use a pond liner as an easier method to seal the pond rather than with concrete slabs, which may require a landscaper.
Due to OH&S regulations, couriers are only permitted to move your freight at or near your front door and side gate and not beyond these points. Consider planning ahead if you wish to place the item inside the house. Please take a moment to view our Shipping Guide
As our concrete fountains are generally 200-400kg, we advise 2-3 people to assist with moving the fountain to your desired location.